The Parsum IPP 50-SE in-line particle size probe is designed to measure larger particles
More information:
 
In-Line Particle Size Probe: Parsum IPP 50-SE Specifications Specifications
 
In-Line Particle Size Probe: Parsum IPP 50-SE Applications Accessories
 
Systems

You are here:HomeProcess productsSpatial filter velocimetry SystemsParsum IPP 70SE

Parsum IPP 70-SE

Malvern's newest sensor specifically designed to measure larger particles in many processes dealing with granulates, such as the chemical and food product industries, among others.

 

Real Time Sensor for measuring particles with an average size of 50-6000µm
 

  The probe can be easily installed directly into any gravity or pneumatic process line.
 
  Automatic feedback to central control room or terminal computer.
 
The IPP 70-SE is an intrinsically safe unit. Its low power input allows for its implementation in hazardous areas. The probe can be used in Ex-Zones 0 and 20, e.g. in pipes/systems of the chemical industry. Due to zone separation the corresponding electronics casing may be used in Ex-Zones 1 and 21.
Spatial Filter Velocimetry
Parsum measures particle size distributions using the accepted method of Spatial Filter Velocimetry


Process Interface
The Parsum is inserted directly in the process line so no sampling is needed.

Automation and control
Direct connection to upstream process control systems and monitoring of current production trends.


Solutions
The sensor has been used in a number of applications including the chemical and food industries.
 

Summary

The IPP 70-Se is the intrinsically safe version of the Parsum probe. It can measure in process lines with a rating of Ex-Zones 0 and 20 (according to ATEX 100). The probe distinguishes itself from the standard type IPP 70-S especially by its low power input, through which the ignition safety type "intrinsic safety ib" is achieved. The IPP 70-Se requires the feeding device IPP 70-Se-B for the isolation of the intrinsically safe circuits of the probe from the measuring computer.
 

Features
Analyzer
  • Continuous In-line particle size measurement without sampling
  • On-line presentation of measurements
  • Can be used in gaseous and liquid media
  • Can be used in fluidized beds
  • Measures particle sizes 50-6000µm
  • Particle velocities 0.01 - 50m/s
  • No recalibration required
  • Individual particle measurement, chord length method
  • Strong industrial design
  • No alignment necessary, alignment is done during the manufacturing process so it is not necessary to ever align the instrument in the field
  • No field calibration required
Process Benefits of Constant Particle Size Distribution Monitoring
  • Enhances process transparency
  • Shortens reaction time if malfunctions occur
  • Facilitates constant quality control
  • Precludes wrong batches
  • Facilitates new automation solutions
  • Saves time and money for sampling, specimen carriage and laboratory analyses